Wholesale1145 alloy aluminum foil

unsa ang 1145 alloy nga aluminum foil?

1145 alloy aluminum foil and its sister sinubong 1235 adunay usa ka minimum nga sulud sa aluminyo sa 99.45%, ug ang kemikal ug pisikal nga mga kabtangan halos managsama. Usahay, pipila ka mga batch sa produksiyon mahimong doble-certified alang sa 1145 ug 1235 mga sinubong. Ingon 1100 aluminum subong, ang duha giisip nga lunsay nga mga haluang metal nga adunay maayo kaayo nga pagkaporma.

Tungod sa taas nga sulud sa aluminyo, aluminum subong 1145 conducts even better than 1100 sinubong. Sa laing bahin, 1145 alloy is less and less on the market as many people find 1235 alloy more readily available as it responds equally well in most applications.

1145 aluminyo has the advantages of high formability, maayo nga electrical conductivity, lightweight and corrosion resistance. Aluminum foil 1145 is commonly used in capacitors, pagputos sa pagkaon, printing foils, beauty salons, electrical appliances, batteries and households, ug uban pa.

1145 aluminum general parameters

Ang 1145 aluminum foil belongs to 1000 serye, which is essentially pure with a aluminum content of 99%, which is widely applied in chemical industry and scientific experiment.

Aluminum nga haluang metal 1145 Chemical Composition

What is the composition of aluminum 1145?

1145 aluminum foil mechanical properties

The advantages of aluminum foil 1145 are:

• To ensure the quality of slices, the end faces are aligned, and there is no burr, porma sa torre, ug uban pa.
• Make sure the tape at the joint is not stuck;
• Strictly control the width and thickness of the finished product to ensure that the upper and lower thicknesses are within 4%;
• The layout is flat, without edges, oil spots, black oil spots, bright lines, rolling printing, bumps, ug uban pa.

Difference between 1100 aluminum foil ug 1145 aluminum foil

Both 1100 ug 1145 are aluminum alloys commonly used in a variety of applications, including foil production. While they share some similarities, there are also differences that make them suitable for specific purposes. Below is a comparison of 1100 ug 1145 aluminum foil:

Aluminum foil alloy composition:

1100 Aluminum Foil: This alloy is known for its high purity, with an aluminum content of approximately 99.0%. It’s almost entirely aluminum, so it’s soft and easy to work with. Has excellent corrosion resistance and thermal conductivity.
1145 Aluminum Foil: This alloy is also high in aluminum, usually around 99.45%. Ingon 1100, it has high purity, good formability and corrosion resistance.

Aluminum foil application:

1100 Aluminum Foil: Because of its softness and high purity, 1100 aluminum foil is often used in applications where ductility and corrosion resistance are important, such as packaging, foil sa kusina, and capacitor manufacturing.
1145 Aluminum Foil: This alloy is often used in applications requiring high electrical conductivity. It is commonly used in transformer windings, capacitors, and other electrical applications.

Aluminum foil conductivity:
1100 Aluminum Foil: While aluminum alloys have good electrical conductivity, they are less conductive than alloys specifically designed for electrical applications.
1145 Aluminum Foil: This alloy is known for its excellent electrical conductivity due to its high aluminum content and purity. It is used when high conductivity is the main requirement.
Aluminum foil strength and mechanical properties:

Both 1100 ug 1145 aluminum foils are relatively soft and have low strength compared to other aluminum alloys. They are generally not used in applications requiring high mechanical strength.
Cost and Availability:

The main difference between 1100 ug 1145 aluminum foil is their specific application. 1100 is better suited for general purpose applications where ductility and corrosion resistance are important, such as packaging and kitchen foils. 1145, on the other hand, was chosen for its high conductivity and is often used in electrical applications such as transformers and capacitors.