The outer surface of the cable needs to be wrapped with a layer of aluminum foil for protection and shielding. This kind of aluminum foil is usually made of 1145 grade industrial pure aluminum. After continuous casting and rolling, चिसो रोलिङ, slitting and complete annealing, it is divided into small coils according to the length required by the user and supplied to the cable foil compounding plant. The surface of the aluminum foil is covered with plastic. The film is cut into several small strips and supplied to the cable factory in a reel shape.
The cable foil is made by attaching a special plastic film (0.058mm thick) on the upper and lower surfaces of 0.15mm-0.20मिमी बाक्लो एल्युमिनियम पन्नी. There are two methods of attaching: dry attaching and wet attaching. The dry method uses a high temperature (200℃) roll pressing method to attach the film; the wet method uses glue. हाल, most of them use dry methods. After attaching the plastic film, use a special instrument to tear off the film from the aluminum foil to determine the degree of adhesion of the plastic film. This measurement data is very important and is called peel strength. According to the communication cable industry standard (code YD/T723.2-94), the strength should not be less than 6.13N/cm; in addition, the heat sealing strength should not be less than 17.5N/cm. The surface quality of aluminum foil is the main factor that affects the peeling strength. The main surface quality problems are oil spots, corrosion, and over-oxidation.
The cable foil uses the airtightness and shielding properties of aluminum foil, and is coated with plastic film on one or both sides to form an aluminum #plastic composite foil, which is used as a cable shield. The cable foil needs to have a small amount of oil on the outside, no holes, and high mechanical properties. सामान्यतया भन्ने हो भने, the length of the cable aluminum foil is extremely strict.
Aluminum foil is commonly used as a cable shielding material for a number of reasons, including its effectiveness against electromagnetic interference (EMI) and radio frequency interference (RFI), flexibility, and cost-effectiveness. Here are some key reasons why aluminum foil is used in electrical cables:
EMI and RFI Shielding: Aluminum foil provides excellent electromagnetic interference (EMI) and radio frequency interference (RFI) shielding properties. It acts as a barrier that reflects and absorbs electromagnetic waves, preventing them from penetrating the cable and interfering with the signals carried by the inner conductors.
लचिलोपन: Aluminum foil is highly flexible and can conform to the shape of the cable, making it suitable for a variety of cable designs and configurations.
हल्का वजन: Aluminum foil is a lightweight material, and using aluminum foil as a shield does not significantly increase the weight of the cable.
जंग प्रतिरोध: Aluminum foil has natural corrosion resistance due to the thin oxide layer formed on its surface.
हेनान हुवावे एल्युमिनियम कं, लि. चीन मा धेरै एल्युमिनियम निर्माण र आपूर्तिकर्ता को नेता हो. हामी कडाईका साथ गुणस्तर नियन्त्रण गर्छौं र ग्राहकहरूमा ध्यान केन्द्रित गर्दछौं. हामी तपाईंसँग गहिरो सहयोग गर्ने आशा गर्दछौं र तपाईंलाई उच्च गुणस्तरको एल्युमिनियम सामग्री उत्पादनहरू अनुकूलन OEM सेवाहरू प्रदान गर्दछौं।. यदि तपाइँ प्रति किलोग्राम वा प्रति टन मानक वजन द्वारा नवीनतम र उत्तम मूल्यहरू प्राप्त गर्न चाहनुहुन्छ भने, कृपया हामीलाई सम्पर्क गर्नुहोस्.
