Air-conditioning is indispensable to escape the heat in summer. Ker klimatske naprave vstopijo v tisoče gospodinjstev, se tudi nenehno razvija. Trenutno, klimatske naprave se postopoma razvijajo v smeri miniaturizacije, visoka učinkovitost, in dolgo življenje. The air-conditioning heat exchange fins are also correspondingly developed in the direction of ultra-thin and high strength. In the 1980s, the thickness of the heat exchange fins was 0.15-0.2 ram, but nowadays, the thickness is only between 0.09 in 0.15 mm. In order to increase the life of the air conditioner, reduce the power consumption, improve the ventilation quality and increase the refrigeration effect, a variety of functions of heat fins have been produced.
The air-conditioning foil has a thickness of 0.1mm to 0.15mm. With the development of technology, there is a trend of further thinning of air-conditioning foils. Danes, the thickness of Japan’s leading product is 0.09mm. In the ultra-thin state, aluminum foil must have good formability, its arrangement and performance must be uniform, less metallurgical defects, and small anisotropy. Ob istem času, it needs high strength, dobra duktilnost, uniform thickness, and good flatness. The standards and alloys of air-conditioning foils are relatively simple and suitable for large-scale production. Vendar, the market has strong seasonality. Professional manufacturers of air-conditioning foils can hardly deal with the contradiction between oversupply in peak seasons and no need in cold seasons.
Due to the weak stock market demand, the production capacity and skill level of China’s air-conditioning foil have been continuously improved in recent years, and a group of companies producing air-conditioning foils of large, medium and small, visoka, middle and low levels has been formed. The product quality of some large companies such as North China Aluminum and Bohai Aluminum It has basically reached the world’s leading level. Because of the overcapacity of domestic production, market competition is extremely fierce.
Air conditioner aluminum foil can be divided into 7 categories according to its processing technology and performance characteristics.
Non-coated aluminum foil refers to aluminum foil that has been rolled and annealed without any form of treatment on the surface. V moji državi 10 pred leti, and about 15 pred leti, the aluminum foils used for heat exchangers in air conditioners were all non-coated aluminum foils. Tudi trenutno, približno 50% of the heat exchange fins used in developed countries are still uncoated aluminum foil, v moji državi, to razmerje je približno 60%.
The so-called coated aluminum foil is to reprocess the surface of non-coated aluminum foil to make it have a certain special function. In countries with fast technological development such as Japan and Germany, coated aluminum foil has been used for more than 15 leta. V moji državi, uporaba prevlečene aluminijaste folije ne presega 10 leta.
Površina izdelka iz aluminijaste folije, odporne proti koroziji, ima določeno protikorozijsko zaščitno plast. The air-conditioning heat exchange sheet made of this product can be applied to relatively harsh areas and can significantly increase the service life of the air conditioner. Ob istem času, zaradi izboljšanja korozijske odpornosti plošče za izmenjavo toplote, nastajanje prahu za površinsko korozijo se močno zmanjša, s tem izboljšamo kakovost prezračevanja in prečistimo zrak v klimatiziranem prostoru.
Hidrofobno aluminijasto folijo imenujemo tudi vodoodbojna aluminijasta folija, in njegove površinske lastnosti so ravno nasprotne od hidrofilne aluminijaste folije. To je, ko kondenzirana voda kondenzira na površini aluminijaste folije, the contact angle with the aluminum foil is relatively large, na splošno 75. the above. Večji kot je, boljša je vodoodbojnost. The ultimate goal of using hydrophobic aluminum foil is the same as that of hydrophilic aluminum foil, to je, da preprečite zadrževanje kondenzirane vode med rebri za izmenjavo toplote. The difference is that the hydrophobic aluminum foil achieves the purpose of removing the condensed water between the heat exchange fins by increasing the contact angle between the condensate water and the heat exchange fins, so that the condensate water forms droplets that are easy to slide down.
In the process of processing and manufacturing air-conditioning heat exchange fins, lubricating oil is generally added to the surface, nato prebijanje in robljenje, and finally trichloroethylene is used to wash off the lubricating oil. Ker je trikloroetilen škodljiv za človeško telo, da bi zmanjšali ta proces, a self-lubricating aluminum foil is produced accordingly. Kot že ime pove, self-lubricating aluminum foil does not need to be lubricated separately during its punching process, in mazanje med luknjanjem nosi predhodno obdelan film na površini aluminijaste folije. Ker ni treba dodajati mazalnega olja, the subsequent cleaning and drying process of trichloroethylene is omitted.
The anti-mold aluminum foil is mainly used for the indoor unit of the air die. Its main function is to prevent the surface of the heat exchange fins from being moldy due to use or storage for a long time, thereby significantly improving the air conditioning quality and preventing abnormal odors. Improve the air-conditioned indoor environment.
Henan Huawei Aluminium Co., doo. je vodja številnih proizvajalcev in dobaviteljev aluminija na Kitajskem. Strogo nadzorujemo kakovost in se osredotočamo na stranke. Upamo, da bomo z vami poglobljeno sodelovali in vam zagotovili visokokakovostne izdelke iz aluminijastih materialov po meri OEM storitev. Če želite dobiti najnovejše in najboljše cene na kg ali na tono standardne teže, kontaktirajte nas.
