1235 aluminium foil bakeng sa betri

1235 aluminium foil ke aluminium alloy foil e nang le litaba tse phahameng ka har'a eona 1000 letoto. Ke thepa ea boleng bo holimo ea aluminium alloy e ka sebelisoang haholo mafapheng a mangata. E ka sebelisoa haholo ka har'a liphutheloana tsa foil tsa lijo le liphutheloana tsa foil tsa moriana. E ka boela ea sebelisoa bakeng sa ho paka ka betri.

1235-aluminum-foil-for-battery
1235-aluminum-foil-for-battery

Foil ea betri 1235 element content

AlloyLeFeCuMongMgCrNiZnVEaZrBa bangAL
12350.40.40.050.050.050.050.100.060.0399.35

1235 aluminum foil specification

Alloy1235
KhalefoF,O,H12,H14,H16 H18,H19,H22,H24 H26,H28,H114
Botenya(mm)0.007-0.2
Bophara(mm)100-1700
Bolelele(mm)C

1235 battery foil specification deviation

Botenya(mm)Thickness Tolerance(mm)Width Range(mm)Width Tolerance(mm)Outer Diameter(mm)Outer Diameter ToleranceCore Inner Diameter
0.012±0.001200-1200±1.0320±1076.2
0.014±0.001
0.016±0.001
0.018±0.001
0.020±0.001
Hlokomela:We can customize according to customer needs

1235 battery aluminum foil mechanical properties

Mechanical properties of 1235 aluminum foil used in battery packaging at room temperature.

BotenyaKhalefoMatla a tšepe(Mpa)Elongation(%)
0.012-0.018H18≥160≥3
0.02H18≥180≥3.5

1235 Battery foil surface quality requirements

When used in battery foil packaging, the upper surface of 1235 aluminum foil should be uniform in color, clean, flat, and free of aluminum chips and powder. Corrosion marks, obvious wheel marks, crushing pits and other defects that may affect use are not allowed. The dark side of the double-sided aluminum foil is not allowed to have clearly visible bright spots, and the smooth side should not have rolling defects such as spots, herringbones, bright lines, etc. and uneven brightness that would affect the use.

1235-aluminium-foil
1235-aluminium-foil

The aluminum foil roll should be wound with appropriate tightness, the end face should be flush and clean, the edges should be smooth, and there should be no burrs, arrows, towers, ruffles, warped edges and other defects that affect use. Aluminum foil is not allowed to have defects such as loose edges on one side or loose edges in the middle that may affect coating.

The misalignment of aluminum foil rolls is not allowed to exceed 1.omm.

 

Hobaneng o re khetha?

Henan Huawei Aluminium Co., Ltd. ke moetapele oa lihlahisoa tse ngata tsa aluminium le barekisi ba China. Re laola ka thata boleng le ho tsepamisa maikutlo ho bareki. Re tšepa ho ba le tšebelisano-'moho e tebileng le uena le ho u fa litšebeletso tsa boleng bo holimo tsa lihlahisoa tsa aluminium tsa tloaelo tsa OEM. Haeba u batla ho fumana litheko tse ncha ka ho fetesisa ka k'hilograma kapa boima ba boima ba lithane, ka kopo ikopanye le rona.

Mohala oa tlhahiso ea aluminium foil

Ho paka

  • Sephutheloana: Nyeoe ea lehong
  • Litlhaloso tse tloaelehileng tsa kesi ea Wooden: Bolelele*Bophara*Bophahamo=1.4m*1.3m*0.8m
  • Hang ha ho hlokahala,lepolanka case dimension ka ka redesigned ha ho hlokahala.
  • Ka nyeoe ea lehong Gross Weight scale: 500-700KG Net Weight: 450-650KG
  • Ela hloko: Bakeng sa litlhoko tse khethehileng tsa ho paka, tse tsamaellanang li tla ekeletsoa ka ho loketseng.