1235 foil ya alumini kwa betri

1235 karatasi ya alumini ni karatasi ya aloi ya alumini yenye maudhui ya juu zaidi 1000 mfululizo. Ni nyenzo ya aloi ya aluminium yenye ubora wa juu ambayo inaweza kutumika sana katika nyanja nyingi. Inaweza kutumika sana katika ufungaji wa foil ya chakula na ufungaji wa foil ya dawa. Inaweza pia kutumika kwa ajili ya ufungaji wa betri.

1235-aluminum-foil-for-battery
1235-aluminum-foil-for-battery

Karatasi ya betri 1235 element content

AloiNaFeCuMheMgCrNiZnVYaZrWengineAL
12350.40.40.050.050.050.050.100.060.0399.35

1235 aluminum foil specification

Aloi1235
HasiraF,O,H12,H14,H16 H18,H19,H22,H24 H26,H28,H114
Unene(mm)0.007-0.2
Upana(mm)100-1700
Urefu(mm)C

1235 battery foil specification deviation

Unene(mm)Thickness Tolerance(mm)Width Range(mm)Width Tolerance(mm)Outer Diameter(mm)Outer Diameter ToleranceCore Inner Diameter
0.012±0.001200-1200±1.0320±1076.2
0.014±0.001
0.016±0.001
0.018±0.001
0.020±0.001
Note:We can customize according to customer needs

1235 battery aluminum foil mechanical properties

Mechanical properties of 1235 aluminum foil used in battery packaging at room temperature.

UneneHasiraNguvu ya Mkazo(Mpa)Kurefusha(%)
0.012-0.018H18≥160≥3
0.02H18≥180≥3.5

1235 Battery foil surface quality requirements

When used in battery foil packaging, the upper surface of 1235 aluminum foil should be uniform in color, clean, flat, and free of aluminum chips and powder. Corrosion marks, obvious wheel marks, crushing pits and other defects that may affect use are not allowed. The dark side of the double-sided aluminum foil is not allowed to have clearly visible bright spots, and the smooth side should not have rolling defects such as spots, herringbones, bright lines, nk. and uneven brightness that would affect the use.

1235-alumini-foil
1235-alumini-foil

The aluminum foil roll should be wound with appropriate tightness, the end face should be flush and clean, the edges should be smooth, and there should be no burrs, arrows, towers, ruffles, warped edges and other defects that affect use. Aluminum foil is not allowed to have defects such as loose edges on one side or loose edges in the middle that may affect coating.

The misalignment of aluminum foil rolls is not allowed to exceed 1.omm.

 

Kwa nini tuchague?

Henan Huawei Aluminium Co., Ltd. ndiye kiongozi wa watengenezaji na wasambazaji wengi wa alumini nchini China. Sisi madhubuti kudhibiti ubora na kuzingatia wateja. Tunatumai kuwa na ushirikiano wa kina na wewe na kukupa huduma za ubora wa juu wa vifaa vya alumini vya OEM. Iwapo ungependa kupata bei mpya na bora zaidi kwa kila kilo au kwa uzito wa kawaida wa tani, tafadhali wasiliana nasi.

Mstari wa uzalishaji wa foil ya alumini

Ufungashaji

  • Kifurushi: Kesi ya mbao
  • Vipimo vya kawaida vya kesi ya Mbao: Urefu*Upana*Juu=1.4m*1.3m*0.8m
  • Mara moja inahitajika,ukubwa wa kesi ya mbao inaweza kuundwa upya kama inavyohitajika.
  • Kwa kila kesi ya mbao Mizani ya Uzito wa Jumla: 500-700Uzito wa KG: 450-650KG
  • Toa maoni: Kwa mahitaji maalum ya ufungaji, sambamba itaongezwa ipasavyo.