Wholesale Aluminum foil for capacitor

Aluminum foil para sa kapasitor

Al metal na haluang metal: 1000, 3000, 8000 serye atbp
Tempered pestle: O - H112 atbp
Lapad: 100mm - 1600mm
kapal: 0.0053mm - 0.2mm
Inner diameter: 76cm, 152cm atbp
Pangunahing materyal: papel, bakal, aluminyo

Mag-iwan ng Mga Mensahe Magpadala ng Email

Aluminum foil for capacitor parameters

Haluang metal	init ng ulo	kapal	Lapad	Core inner diameter	Maximum outer diameter of aluminum coil	Thickness tolerance	Pagkabasa	Brightness L
Aluminum foil for capacitors 1235	0	0.005-0.016mm	100-500mm	76	500	≦5	Class A (Pagsubok sa tubig ng brush)	≦60

aluminum foil capacitor

The aluminum foil used in electrolytic capacitors is a corrosive material that works under polar conditions. It has higher requirements for the structure of aluminum foil. The aluminum foil used is divided into three types: cathode foil, with a thickness of 0.015mm to 0.06mm; high-voltage foil, with a thickness The thickness is 0.065mm～0.1mm, and the aluminum foil is required to be produced with high-purity aluminum; the thickness of the low-pressure foil is 0.06mm～0.1mm.

Chemical composition of high pressure raw foil and low pressure raw foil（%）
Cu(≤)	Fe(≤)	At(≤)	Sinabi ni Al(≥)
0.005	0.003	0.0025	99.99
0.005	0.015	0.015	99.97
0.01	0.02	0.02	99.95
0.01	0.04	0.04	99.93
0.01	0.06	0.06	99.90
0.01	0.10	0.08	99.85
0.0025~0.0050	≤0.014	≤0.014	≥99.97
Tandaan: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Chemical composition of cathode foil（%）
Cu	Fe	At	Sinabi ni Al
0.01	0.16	0.16	99.7
0.01	0.25	0.20	99.6
Tandaan: After the agreement between the supplier and the buyer, it can be supplied according to the agreement.

Longitudinal room temperature mechanical properties of aluminum foil

kapal (mm)	init ng ulo	Lakas ng makunat N /mm2	Pagpahaba δ %
kapal (mm)	init ng ulo	not less than
0.015~0.090	M	24.5	2.0
0.015~0.090	Y	98.0	0.5
0.100~0.200	M	29.4	3.0
0.100~0.200	Y	98.0	0.5

Crystal Structure Properties of Capacitor Aluminum Foil

The average surface dislocation density of the soft-state high-pressure original foil is not more than 10∧6/cm2.
Ang (100) crystal plane occupancy rate of the soft-state high-pressure original foil is not less than 80%.
The thickness of the oxide film on the surface of the soft-state high-voltage original foil is not more than 6nm.

Tandaan: Foils with other parameters can be supplied by agreement between the supplier and the buyer.

Aplikasyon

aluminum foil for electrolytic capacitor

Bakit tayo pipiliin?

Henan Huawei Aluminum Co., Ltd. ay ang pinuno ng maraming mga paggawa at mga supplier ng aluminyo sa China. Mahigpit naming kinokontrol ang kalidad at tumutok sa mga customer. Umaasa kaming magkaroon ng malalim na pakikipagtulungan sa iyo at mabigyan ka ng mataas na kalidad na mga produkto ng aluminum material na custom na serbisyo ng OEM. Kung gusto mong makuha ang pinakabago at pinakamahusay na mga presyo sa bawat kg o bawat toneladang karaniwang timbang, mangyaring makipag-ugnayan sa amin.

linya ng produksyon ng aluminyo foil

Pag-iimpake

Package: Kahoy na kaso
Standard Wooden case na detalye: Haba*Lapad*Taas=1.4m*1.3m*0.8m
Kapag kailangan,ang dimensyon ng wooden case ay maaaring muling idisenyo kung kinakailangan.
Bawat wooden case Gross Weight scale: 500-700KG Netong Timbang: 450-650KG
Puna: Para sa mga espesyal na kinakailangan sa packaging, nararapat na idagdag nang naaayon.